maxreading is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

The Best Metal Cutters of 2022 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Metal Cutters of 2022. Check our ranking below.

2,294 Reviews Scanned

SaleRank No. #1
Crescent Wiss 9-3/4 Inch MetalMaster Compound Action Snips - Straight, Left and Right Cut - M3R
  • Cuts straight and slight curves with yellow handles for quick identification
  • Precision cast molybdenum blades with conk ground edges and serrations for cutting low carbon, cold rolled 18 gauge steel
  • Blade serrations spread cutting force across jaws improving cut quality and tool life
  • Superior Design prevents tears at end of cuts by controlling blade bypass and minimizes folding and burrs
  • Ergonomic, single handed latch operation for left or right handed use
Rank No. #2
WORKPRO W017004A Bolt Cutter, Bi-Material Handle with Soft Rubber Grip, 14", Chrome Molybdenum Steel Blade
  • Note: cutting locks is not recommended
  • Drop forged chrome molybdenum steel and powder coated jaws for sure, efficient cutting and long life. Ergonomic bi-material Anti-slip grips provide greater control and comfort in cutting
  • Classic lever-fulcrum design and precisely aligned blades deliver added leverage with less effort
  • Cutting Capacity: HRC≤42: 7/32-inch(5mm Maximum);HRC<25: 1/4-inch(6mm Maximum)
  • Ideal for cutting soft metal, bolts, rods, rivets and chain
Rank No. #3
CRAFTSMAN Aviation Snips, Straight Cut (CMHT73756)
  • CUT CAPACITY OF TIN SNIPS: Cuts up to 18GA (1.2mm) cold-rolled steel or 22GA (0.7mm) stainless steel.
  • EASE OF USE: Spring-assisted latch on metal snips for fast one-handed operation
  • DURABILITY: Induction hardened cutting edge on snips for sheet metal stays sharp longer (compared to non-induction hardened jaws).
  • 1/4-inch blade markings for quick precise cuts
  • Full Lifetime Warranty, refer to "Warranty & Support" section below for full details
SaleRank No. #4
DEWALT Metal Shears Attachment, Impact Ready (DWASHRIR)
  • Able to cut up to 18GA material
  • 360 degree swivel head for maneuverability
  • Connects via standard 1/4-inch hex shank
  • Compatible with most 18V-20V impact driver and drills
  • Able to cut up to 18GA material
SaleRank No. #5
WEN 3650 4.0-Amp Corded Variable Speed Swivel Head Electric Metal Cutter Shear
  • Pressure sensitive trigger cuts anywhere from 0 to 2500 strokes per minute
  • Attack up to 20 gauge stainless steel and 18 gauge sheet metal
  • Lightweight design limits fatigue during operation
  • Utilizes a powerful 4-amp motor, curling the metal as it cuts
  • Swiveling head rotates a full 360 degrees to meet the needs of any project
Rank No. #6
Hurricane 10 Inch Aviation Tin Snips, Straight Cut, Chrome Vanadium Steel
  • Hurricane 10 Inch Aviation Tin Snips, Straight Cut
  • Material: Chrome Vanadium Steel, Serrated edge blades with sanding finish
  • Handle: Bi-color handle with rubberized grip for comfort and control
  • Safety: Locking latch prevents damage to cutting edge when stored, Cuts up to 1/16"(1.8mm) cold-rolled steel sheet
  • Yellow Straight Cut
Rank No. #7
Metal Shears Aviation Snip Set 3 Pack Tin Snips Cutters - Left, Right and Straight Metal Cutting Shears - Snips for Sheet Metal -Cutting Pliers Snip
  • 3 Pack set - Includes left, right, and center cut offset models,so you can cuts from any angle.
  • High quality blades - Blades are hot drop-forged of molybdenum alloy steel and austemper heat-treated for maximum strength and durability.
  • Comfortable Grips - Anti-rust CRV grips conforms with the motion of the user’s hands and the indented ribs prevent hand and finger slippage.
  • Multiple Usage - Ideal for cutting aluminum,sheet metal,leather,floor covering,card board and plastic.
  • Easy Cutting - Compound leverage multiplies handle force to cutting blades by 7:1 for significantly less fatigue.  After multiple tests,non-slip grip is easier to use and more stable.
SaleRank No. #8
MFIROZ 10 Inch Aviation Snips, Industrial Quality Straight Cut Tin Snips. Sheet Metal Cutter are Suitable for Cutting Aluminum, Hard Materials, and Other Thin Metal Plates
  • 【High Quality Material】 The metal scissors are made of premium chrome vanadium steel processed with a high-frequency heat treatment. The high-tensile strength steel tool efficiently converts manual pressure into impressive cutting power.
  • 【Ergonomic Design】 Metal shears dynamically conforms with the motion of the user's hand like a good fitting pair of gloves. The non-absorbent material has a soft touch and feel without being tacky. Non-slip ribs are spaced to prevent palm or finger slippage.
  • 【Wide Use】 MDIROZ wire snips are ideal for cutting metal sheets, it also can be used to cut various hard materials like aluminum, plastic plates, vinyl siding, cardboards, wire mesh, copper, leather, rubber and so on.
  • 【Safe & High Efficiency】 The metal safety lock is between the strong handles. It's easy to open and close for convenient security system. Serrated cutting edges prevent materials from slipping during use. It's safe and easy to do metalworking!
  • 【Perfect After-sales Service】 If for any reason you decide not to like it, you will get a full refund. We always put custome's requires to the first place. Your advice make us progress and your happy is our greatest power.
SaleRank No. #9
Finder 10'' Straight Cut Aviation Snips, Scissors for Cutting Hard Material, Metal Sheet Cutter
  • ★ Ideal for cutting hard material: aluminum, sheet metal, leather, floor covering, card board and plastic.
  • ★ Ergonomic designed PVC handle, comfortable grip
  • ★ Anti-rust CRV steel, hard and endurable
  • ★ Heat-treated blade, sharp and hard
  • ★ Safety lock between the handles
Rank No. #10
Finder 12" Aviation Snips, Long Straight Cut Tin Snips Cutting Shears Power Cutter with CR-V Blade & Comfortable Grip, 300mm Scissors for Cutting Metal Sheet, Hard Material, Industrial Quality
  • STRAIGHT REGULAR CUT: The extra long straight-cut aviation snip is used to cut straight and wide curves to the left and right, and can be used in either hand. The straight blades that allow the hand to be kept safe above the cutting work below.
  • LONGEST LASTING CUTTING EDGE: The blades are hot drop-forged of premium CRV steel and austemper heat-treated for maximum strength and durability. The aviavtion tin snips adopt vibration grinding head covering anti-rust oil, which is rustproof and more endurable.
  • ERGONOMIC DESIGN: The ergonomic designed TPR handle with comfortable soft grip, which conforms with the motion of the user's hands and the indented ribs prevent hand and finger slippage. The tail of aviation shear is with suspension hole design, which is easy to carry and store.
  • SAFE & HIGH EFFICIENCY: The metal safety lock is between the strong handles. It' s easy to open and close for convenient security system. High tensile strength steel will not bend from hand pressure and provides efficient conversion of hand force to cutting power. Serrated cutting edges prevent materials from slipping during use. It' s safe and easy to do metal working!
  • WIDE APPLICATION: Finder aviation snips are ideal for use on sheet materials, beading, cans, tins and fixings, and specially designed to cut hard materials, aluminium, sheet metal, plastic plates, vinyl siding, cardboard, wire mesh, copper, leather, tiles, rubber and shingles.

Last update on 2021-04-20 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Metal Cutters?

Do you get stressed out thinking about shopping for a great Metal Cutters? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Metal Cutters, which is why we have assembled a comprehensive list of the greatest Metal Cutters available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Metal Cutters that you consider buying. Your questions might include the following:

  • Is it worth buying an Metal Cutters?
  • What benefits are there with buying an Metal Cutters?
  • What factors deserve consideration when shopping for an effective Metal Cutters?
  • Why is it crucial to invest in any Metal Cutters, much less the best one?
  • Which Metal Cutters are good in the current market?
  • Where can you find information like this about Metal Cutters?

We’re convinced that you likely have far more questions than just these regarding Metal Cutters, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Metal Cutters, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Metal Cutters. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Metal Cutters buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Metal Cutters currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Metal Cutters has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Metal Cutters?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Metal Cutters.
  5. Customer Ratings: Number ratings grade Metal Cutters objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Metal Cutters.
  7. Product Quality: You don’t always get what you pay for with an Metal Cutters, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Metal Cutters is should be an indication of how long it will work out for you.

We always remember that maintaining Metal Cutters information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Metal Cutters is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.