maxreading is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

20 Best Focus Rs Aluminum Skid Plate of 2022 – Max Reading

After hours researching and comparing all models on the market, Max Reading finds out the Best Focus Rs Aluminum Skid Plate of 2022. Check our ranking below.

2,749 Reviews Scanned

Rank No. #1
Aluminum Skid Plate, Engine Splash Shield for Ford Focus RS
  • Powder Coated, type 5052, .09" Aluminum. Excellent strength/weight ratio, a significant protection upgrade from the factory undertray.
  • Air inlets are modeled after the OEM air inlets, to prevent loss of cooling while maintaining superior protection.
  • Included hardware replaces the cheap factory fasteners with the highest quality fasteners available.
  • No drilling required. Maintenance-friendly. Works with many aftermarket upgrades.
  • Rivet-nut Installation tool required**
Rank No. #2
Aluminum Skid Plate, Engine Splash Shield for Ford Focus RS w/Oil Change Access Panels (BLACK)
  • Powder Coated, type 5052, .09" Aluminum. Excellent strength/weight ratio, a significant protection upgrade from the factory undertray.
  • Oil change access panels provide easy access to you oil filter and drain plug.
  • Air inlets are modeled after the OEM air inlets, to prevent loss of cooling while maintaining superior protection.
  • No drilling required. Maintenance-friendly. Works with most aftermarket upgrades.
  • Rivet-nut Installation tool required**
Rank No. #3
Rexka 10 Sets T30 Torx Head Under Engine Shield Fender Liner Deflector Grille Screw Grommet Retainer Screw Bolt Nut Grommet Kit Compatible with Ford Escape F-150 Edge Focus Fusion C-Max S-Max Lincoln
  • Meet or Exceed OEM Specification, Made of High Quality Durable Nylon not Plastic. Usually Used Together In Air Deflectors, Splash and Heat Shields..etc
  • Other Names (Screw) :Emblem Screw, Deflector Screw, Fender Liner Screw, Lower Deflector Screw, Lower Shield Screw, Under Cover Screw, Front Shield Screw, Air Deflector Screw, Exhaust Heat Shield Screw, Air Guide Screw, Grille Screw, Screw And Washer Assembly
  • Other Names(Nut) :Front Deflector Retainer Nut, Side Shield Nut, Under Cover Nut, Rear Deflector Nut, Deflector Nut, Lower Shield Retainer Nut, Under-Body Shield Nut, Lower Shield Nut, Shield Nut, Air Deflector Nut, Front Shield Nut, Lower Deflector Nut, Front Deflector Nut, Reservoir Assembly Nut, Front Deflector U-Nut, Rear Deflector U-Nut, Side Cover Nut, Air Shield Nut, Lower Deflector Retainer Nut, Bumper Cover Retainer, Rear Deflector Retainer, Under Cover Retainer, Exhaust Heat Shield Nut
  • Fits the Following Cars: C-Max 2013-2018,Fusion 2013-2018, Escape 2013-2018, F-150 2015-2018, Edge 2015-2018, Escort 1985-1990 1995-2001, Focus 2004-2018, Galaxie 1979-1983, Galaxy 2006-2015, KA 1996-2009, Mondeo 1993-2007, Orion 1985-1993, Scorpio I 1989-1994, Sierra 1982-1993, Fiesta 1989-1996
  • 10 pcs of T30 Torx Drive Head Self-Tapping Screw, Black Phosphate, M5 x 20mm; 10 pcs of Screw Grommet,Light Green Nylon
Rank No. #4
SMALLRIG Camera Extended Quick Release Plate Adapter Only for DJI RS 2 / RS2 Gimbal - 3031
  • 【ONLY FOR DJI RS 2】SmallRig Extended Quick Release Plate 3031 is specially designed for DJI RS 2 gimbal. It is used to mount professional or larger cameras on your handheld gimbal stabilizer. For example, it is compatible with Canon C100/200/300, RED, Komodo on the RS 2 gimbal.
  • 【1.6" LONGER THAN ORIGINAL PLATE】The plate 3031 measures 40mm (1.6 inches) longer than the original RS 2 quick release plate to provide additional leverage for larger cameras and provide more room for mounting optional components, such as a rod mount for a follow focus motor, zoom motor, or lens support.
  • 【ANTI-TWISTING DESIGN】The plate features both 3/8"-16 and 1/4"-20 camera mounting screws for mounting a variety of cameras. You can add Counterweight Kit 3125 to the rear to balance the stabilizer, attach Lens Support 2850 to protect the lens mount, and Focus Motor Component 2851 to connect the RS 2 original focus motor when the lens is mounted on a large camera body or a camera with battery grip.
  • 【1/4" COUNTERWEIGHT THREAD ON REAR】There is a 1/4"-20 thread on the bottom rear of the plate to add an optional counterweight. It can be used for adding the Counterweight AAW2284 or AAW2285 for balance.
  • 【RUBBER PADS & MEASUREMENT SCALE】Padding on top of the plate protects your camera from twisting or scratching. Measurement markings on the side allow you to keep track of the best plate balancing position for your camera.
Rank No. #5
Center Engine Splash Shield Compatible with FORD FOCUS 2012-2018/C-MAX 2013-2018 Under Cover 2.0L Eng HB/Sdn
  • FREE 1-year UNLIMITED mileage warranty coverage on Garage-Pro items purchased thru AUTO PARTS GIANT Store
  • A high quality, Direct Fit OE Replacement Engine Splash Shield from Garage-Pro
  • Plastic
  • Can replace units without louvers; Engine under cover
Rank No. #6
240 Pcs Car Push Retainer Kit and Free Fastener Remover,Assortment Universal Bumper Retainer Clips Push Type Retainers Set in Case Fits For GM Ford Toyota Honda Chrysler
  • ►SAVE TIMEFRUSTRATION AND MONEY - No need to go to a auto parts store and look for different fasteners.We have them in box for what you need.
  • ►EASY USAGE - Get all you need in this box, save time and money for you. For Mechanic, Car modification lover ect
  • ►BONUS FASTENER REMOVER - Allow you to quickly and easily remove the car door panel and upholstery clips without causing damage to them. Easy access into confined areas.
  • ►STURDY AND DURABLE NYLON MATERIAL: these car retainer clips are made of high-quality black nylon material, anti-wear and anti-corrosion, would not break or crack easily during use.
  • ►UNIVERSAL FIT KIT - Package including multiple sizes from 6.3mm to 10mm among total 240PCS for most uses, fitting for door trim, radiator shield yoke, fender, bumper, side skirt, grille, engine cover and splash shield retainers replacement,compatible with Ford, GM, Chrysler, Toyota, Honda and more. All packed in a plastic container for easy organization and storage.
Rank No. #7
Rexka 10 Sets T30 Engine Splash Shield Guard Undertray Cover Screws Bolt Nut Clip Kit Compatible with Ford Focus Escape Explorer
  • Engine Splash Shield Undercar Bolt Clip Kits
  • 10pcs T30 torx head screw. Other Names:Fender Liner Bolt, Splash Shield Screw, Outer Bracket Screw, Lower Deflector Screw, Under Cover Screw, Bumper Cover Screw, Cowl Grille Screw, Reinforced Panel Screw, Fender Liner Screw, Valance Screw, Screw And Washer - Cross Rece
  • 10pcs Red Nylon Under-Body Shield Nut. Other Names:Front Deflector Retainer Nut, Side Shield Nut, Under Cover Nut, Rear Deflector Nut, Deflector Nut, Lower Shield Retainer Nut, Under-Body Shield Nut, Lower Shield Nut, Shield Nut, Air Deflector Nut, Front Shield Nut, Lower Deflector Nut, Front Deflector Nut, Reservoir Assembly Nut, Front Deflector U-Nut, Rear Deflector U-Nut, Side Cover Nut, Air Shield Nut, Lower Deflector Retainer Nut, Bumper Cover Retainer, Rear Deflector Retainer
  • 10pcs Under Cover U nuts. Other Names:Reservoir Nut, Side Reinforced Nut, Under Cover Nut, Master Cylinder Nut, Side Support Nut, Cowl Grille Nut, Lower Shield Nut, Reinforced Panel Nut, Reservoir Tank Nut, Side Bracket Nut, Fender Liner Retainer, Ft Fender Liner Nut, Nut - Spring
  • Fits C-Max 2013-2018, Escape 2013-2018,Focus 2012-2018. etc
Rank No. #8
SMALLRIG Quick Release Plate for Manfrotto-Type Compatible with DJI RS2, RSC2 and Ronin-S (RS 2/ RSC 2/ RS) Gimbal - 3158
  • 【FOR DJI RS2 & RSC2 GIMBAL】SmallRig Quick Release Plate for Manfrotto-Style 3158 is exclusively designed for DJI RS2, RSC2, and Ronin-S/ RS Gimbal, and it allows you to mounts Camera or Cage onto the Gimbal.
  • 【SWITCH QUICKLY】The SmallRig QR Plate for Manfrotto standard 3158 assists the camera in quickly switching between the tripod, shoulder, gimbal, and other shooting modes.
  • 【PREVENT TWISTING】The SmallRig QR Plate 3158 features two mounting screws to prevent twisting. Also, the padding on top protects your camera from scratching.
  • 【REMOVABLE GEAR RACK】There is a removable gear rack on the bottom that helps position your camera in small increments, and the measurement scales also allow you to keep balancing position for your camera.
  • 【OPTIONAL MOUNTING POINTS】This QR Plate 3158 allows you to mount optional counterweights or counterweight kit 3125 via the 1/4"-20 thread on the bottom. It also features three M4 threaded holes, which is compatible with the original follow focus rod mount.
Rank No. #9
TC-Motor Black Aluminum Engine Skid Plate For Dirt Pit Bike XR50 CRF50 90cc 110cc 125cc 140cc Lifan YX SSR Thumpstar Coolster Taotao
  • This Aluminum Engine Skid Plate For Honda CRF50 / XR50 2000-2007 Pit Dirt Bikes.
  • It Also Widely Used On Many Brands Of 50cc 70cc 90cc 110cc 125cc 140cc Chinese Pit Dirt Bikes,Such As SSR,YCF,IMR,Atomik,Thumpstar,BSE,Apollo,Kayo,Stomp,Piranha,DHZ,GPX,Pitster Pro,SDG,Braaap,Taotao,Coolster,Lifan,YX,Ect.And Many Other Chinese Brands.
  • Please Note It's Not For The Electric Start Engine Pit Dirt Bikes. / Please Compare Your Stock Engine Skid Plate With The One In Our Listing Before Order.
  • Product Shipped From China
  • Arrival Within 7-15 Business Days
Rank No. #10
ELITEWILL Silver Aluminum Front Lower Engine Splash Shield Guard Under Tray Cover Skid Plate Fit for 2003-2009 Nissan 350Z & 2003-2006 Infiniti G35 and 03-07 G35 Coupe
  • The Silver Aluminum Under Tray is a direct fit for 2003-2009 Nissan 350Z, 2003-2006 Infiniti G35 RWD Sedan and 03-07 G35 Coupe.
  • The Engine Skid Plate is made from high quality aluminum,Lightweight and much more protection.While strengthening bumper support for better stability at high speeds.
  • Ventilation holes with laser cut to direct fit in the stock location.And these added holes to help hot air escape from the engine compartment. So as to improve the airflow.
  • Easy oil change and Easy cleaning: With the integrated oil change access door all you have to do is remove 2 bolts and you have ample room to get to the oil filter and drain plug.The smooth surface provides additional durability and easy cleaning characteristics.
  • Installation is quick and requires little working knowledge.Most people can do it on there own with a floor jack, jack stands,and a 10mm wrench.
Rank No. #11
SLIPLO Universal Front Bumper Scrape Guard Skid Plate Bumper Protection for Lowered Cars, Carbon Fiber Splitters and Aftermarket bumper lips, Anti-Scratch DIY Bumper Protector Kit
  • ✅ PROTECT YOUR CAR’S PAINT JOB with our car bumper protector kit, which will save your car’s front bumper lip, carbon fiber spoiler or splitter from steep driveway, parking curb, potholes and speed bump scrape damage
  • ✅ REDUCE CONTACT SURFACE AREA BY 50%: Our elite bumper guards for cars provide anti-skid bumper protection during impacts, protecting your car's paint and helping preserve your vehicle's polished looks.
  • ✅ INSTALL YOUR FRONT BUMPER GUARD IN NO TIME: This front bumper skid plate kit comes with pre attached automotive-grade 3M double-sided adhesive tape allowing for drill-free installation of each skid plate piece.
  • ✅ OPT FOR FULL VEHICLE COVERAGE: Order 1 DIY front bumper guard kit for your bumper front lip, 2 kits for bumpers that need extended coverage or 4 kits for extended bumpers and both rocker panel coverage.
  • ✅ DURABLE BUMPER GUARD - MADE IN THE USA: This heavy-duty kit of bumper guard for SUV and car is proudly made in the USA from the same high-performance polyurethane used by snowplows, which resists intense weather and impact for years.
Rank No. #12
Beck Arnley 039-5062 Throttle Body Gasket
  • Matches OE form, fit and function
  • Made with high quality materials for durability
  • Designed for underhood conditions
  • Packaged in clear plastic for easy visibility and identification of all components
  • Application specific for this vehicle
Rank No. #13
CAMVATE Multi-Function Mounting Plate Cheese Plate with 1/4"-20 and 3/8"-16 Connections
  • Aluminum Alloy Construction
  • Dimension:30mm X 108mm
  • It's variety of 1/4-20 and 3/8-16 threaded holes
Rank No. #14
Xotic Tech Tow Hook License Plate Screw On Mount Bracket Compatible with Ford Focus RS 2016 2017 2018 (Black)
  • ✅One set of license plate mounting bracket that apply to front bumper tow hook place.
  • ✅Made with black high quality T6061 billet aluminum.
  • ✅8 mounting holes to give a flexible place to mount it and avoid parking distance sensor(PDC)/ lights/ vents.
  • ✅Compatible with Focus RS 2016-2018 (Neither fit regular Focus nor ST models).
  • Installation: Just simply screw this item in an anticlockwise direction to the area where it is supposed to be mounted. No modification is required.
Rank No. #15
PartsSquare 50pcs Car Retainer Clips Nylon Bumper Auto Body Push Pin Type Retainer Clamps Fender Liner Fastener Rivet Push Clips Retainer Replacement for Panels, Floor Attachments
  • Package Content : 50pcs Plastic Rivets Fastener
  • Application: Front Bumper, Fender, Radiator Grille, Body Mouldings, Fuel Tank, Head Lamps, Wheel Apron Panels, Panels, Floor Attachments, Box, Trims, Scuff Plates, Spoilers Retainer (Direct replacement, no need to modify)
  • Hole Size:8mm;Head Diameter:18mm;Stem Length:12mm
  • Item condition: Brand New.
  • Material: Plastic, Nylon
Rank No. #16
ELITEWILL Black Aluminum Front Lower Engine Splash Shield Guard Under Tray Cover Skid Plate Fit for 2003-2009 Nissan 350Z & 2003-2006 Infiniti G35 and 03-07 G35 Coupe
  • The Black Aluminum Under Tray is a direct fit for 2003-2009 Nissan 350Z, 2003-2006 Infiniti G35 RWD Sedan and 03-07 G35 Coupe.
  • The Engine Skid Plate made from high quality aluminum,Lightweight and much more protection.While strengthening bumper support for better stability at high speeds.
  • Ventilation holes with laser cut to direct fit in the stock location.And these added holes to help hot air escape from the engine compartment. So as to improve the airflow.
  • Easy oil change and Easy cleaning: With the integrated oil change access door all you have to do is remove 2 bolts and you have ample room to get to the oil filter and drain plug.The smooth surface provides additional durability and easy cleaning characteristics.
  • Installation is quick and requires little working knowledge.Most people can do it on there own with a floor jack, jack stands,and a 10mm wrench.
Rank No. #17
Evan-Fischer Engine Splash Shield compatible with 2012-2016 ford Ford Focus 2013-2016 C-Max
  • FREE 1-year UNLIMITED mileage warranty coverage on Evan-Fischer items purchased thru AUTO PARTS GIANT Store
  • A high quality, Direct Fit OE Replacement Engine Splash Shield from Evan-Fischer
  • Can replace units without louvers; Engine under cover
Rank No. #18
AUTOPA AV6Z-6P013-A Engine Splash Shield Guard for Ford Focus 2012-2018 C-Max 2013-2018
  • For Ford Focus 2012-2018; For Ford C-Max 2013-2018; For Ford Ford Transit Connect 2014-2017
  • Aftermarket Product with Premium Quality. 1 Year Warranty
  • Enhance Performance.Easy Installation.High Reliability
  • Perfect Match for the Original Car.Please verify Fitment or Application
  • Replacement OEM ( Original Equipment Part) Number: AV6Z6P013A, CP9Z6P013A, AV6Z-6P013-A, CP9Z-6P013-A. Other Part Number: FO1228121
Rank No. #19
Cuztom Tuning 3D Style Smoke Tinted Window Visor Shade Rain Guard Compatible with 2009-2018 Ford Focus 4 Door Hatchback ST
  • Fitment: Compatible With 2009-2018 FORD FOCUS 4 DOOR HATCHBACK ST RS HATCHBACK
  • 3D Wavy Aero Design Window Visor Rain Guard Sets in Smoke Tinted FInish
  • Already Comes With Pre-Applied 3M Automotive-Grade Tapes. Super Easy Installation, Just Clean, Peel and Stick
  • Allows You To Roll Down The Window During Rain/Snow Weather To Get Fresh Air and To Defrog The Glass.
  • Dramatically Improve Styling & Appearance. This is not in-channel style item
Rank No. #20
Led Light Bar Mounting Bracket Driverwish Front License Plate Frame Bracket License Plate Mounting Bracket Holder for Off-Road Lights LED Work Lamps Lighting Bars
  • Heavy-duty bracket: high-quality aluminum alloy material and Advanced production process, the mounting bracket is impact resistant and anti-corrosion
  • Mounting position: 4 different locations/methods to install the off-road lights. On the bull bar, 2 Sets of mounting holes on top and 1 set in front
  • Easy installation: no drill, no modification required, just like replace a license plate using its mount location, usually can be installed in 20 minutes
  • Universal fitment: fits for almost all car, Jeep, truck, Pickup, SUV, 4x4, etc. Work with most off road auxiliary lights, fog lights, driving lights, LED work Lamp and LED light bars
  • Color:Available in black and silver, please choose your favorite color.

Last update on 2021-08-03 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Focus Rs Aluminum Skid Plate?

Do you get stressed out thinking about shopping for a great Focus Rs Aluminum Skid Plate? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Focus Rs Aluminum Skid Plate, which is why we have assembled a comprehensive list of the greatest Focus Rs Aluminum Skid Plate available in the current market. We’ve also come up with a list of questions that you probably have yourself.

Max Reading has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Focus Rs Aluminum Skid Plate that you consider buying. Your questions might include the following:

  • Is it worth buying an Focus Rs Aluminum Skid Plate?
  • What benefits are there with buying an Focus Rs Aluminum Skid Plate?
  • What factors deserve consideration when shopping for an effective Focus Rs Aluminum Skid Plate?
  • Why is it crucial to invest in any Focus Rs Aluminum Skid Plate, much less the best one?
  • Which Focus Rs Aluminum Skid Plate are good in the current market?
  • Where can you find information like this about Focus Rs Aluminum Skid Plate?

We’re convinced that you likely have far more questions than just these regarding Focus Rs Aluminum Skid Plate, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Focus Rs Aluminum Skid Plate, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Focus Rs Aluminum Skid Plate. Make sure that you are only using trustworthy and credible websites and sources.

Max Reading provides an Focus Rs Aluminum Skid Plate buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Focus Rs Aluminum Skid Plate currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Focus Rs Aluminum Skid Plate has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Focus Rs Aluminum Skid Plate?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Focus Rs Aluminum Skid Plate.
  5. Customer Ratings: Number ratings grade Focus Rs Aluminum Skid Plate objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Focus Rs Aluminum Skid Plate.
  7. Product Quality: You don’t always get what you pay for with an Focus Rs Aluminum Skid Plate, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Focus Rs Aluminum Skid Plate is should be an indication of how long it will work out for you.

Max Reading always remembers that maintaining Focus Rs Aluminum Skid Plate information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Focus Rs Aluminum Skid Plate is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.