maxreading is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

The Best Bushing Tool of 2022 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Bushing Tool of 2022. Check our ranking below.

2,390 Reviews Scanned

Rank No. #1
OTC 4244 Freightliner Rear Suspension Bushing Tool
  • OTC's Freightliner Rear Suspension Tool features a robust 15-Ton capacity cylinder and installation/removal adapters
  • Removes and installs single-wrapped FAS II Airliner Freightliner Rear Suspension Bushings 'on vehicle' - no need to remove the spring assemblies to use this tool
  • Completes the job in a fraction of the time that traditional methods take
  • Saves an average of 45 minutes per bushing (4 per vehicle) on flat rate of 1.5 hours per bushing - a huge time savings
  • No more hammering prevents impact damage to suspension components while dramatically reducing the effort required by the technician performing the work
Rank No. #2
OEMTOOLS 27212 Manual Bushing Installation and Removal Tool Set, Bushing Removal Tool, Bearing Press Kit, Bushing Tool Kit, Tool Kit Push Pull Bushing
  • EASY TO USE: The bushing puller kit cuts down on frustration and expended energy during difficult wheel bearing, suspension bushing, and seal removal and installation repairs; Bushing press kit saves a ton of time
  • WIDE RANGE OF USE: The adapter cups with the bearing puller set provide a wide range of options to fit your exact repair needs; The OEM Tools bushing driver set includes 20 different size cups for versatile use
  • ELIMINATE DAMAGE: The metric bushing driver set reduces the possibility of damaging the bearing/suspension housings; Don’t have to remove components from vehicles with this bushing tools set
  • ADAPTABLE: The bushing installer kit comes with an adapter to use bushings with shop press; Plates and sleeves can be used in a standard workshop press when on-site access isn’t possible
  • MORE USES: The bushing tool set works with silent bearings, hydraulic bearings, ball bearings, shaft seals, rubber bearings, and more; Cups with bushing press and pull kit allow for hundreds of combinations
Rank No. #3
SCITOO Fit Cars LCV and HGV Engines Universal Press and Pull Sleeve Kit Removal Installation Bushes Bearings Tool Kit
  • Compatible Vehicles : Applicable to many cars and LCV ,HGV Engines
  • Package: 20 x Press Sleeves, Inside Diameter from 34-72mm in 2mm steps, Outside Diameter from 44-82mm in 2mm steps, 4 x Pulling Spindles with nuts and thrust bearings (M10. M12. M14. M16)
  • Product Usage: For Removal and Installation of Bearings, Bushes, Seals and cut down the possibility of damaging the bearing or suspension housings
  • Benefit : Created from rugged drop forged construction and heat treated to withstand difficult and rugged jobs, making this tool set a long lasting and reliable tool
  • Important Note: When doing automotive maintenance always make sure all the tools are correctly used and wear safety glasses and gloves . Any question or problem, feel free to contact us
Rank No. #4
KUNTEC 52 Piece Custom Bushing Removal Tool Axle Bearing Race Seal Installer Remover, Bush Removal Puller Bearing Press Tool Kit
  • Bushing removal tool kit allows you to build your own custom bushing driver
  • The discs goes from 18mm (25/32") all the way to 65mm (2-9/16") in 1mm increments plus (2-29/32") 74mm. All discs are connected with a 12mm shaft and screw which quickly connects to a 180mm 7-1/2" handle
  • Includes a long handle shaft to simplify bearing race and seal replacement and help you remove or install wheel bearings quickly and professionally.
  • All 50 pieces are interchangeable with each other so you get 2450 different size variations
  • Made from carbon-steel construction and black anodic oxidation coating for rust-resistance, this mechanic toolset will stand up to years of heavy use.
Rank No. #5
Cool Runnings
  • Amazon Prime Video (Video on Demand)
  • English (Playback Language)
  • English (Subtitle)
Rank No. #6
XtremepowerUS Upper Control Arm Bushing Removal Tool Repair for Ford, GM & Chrysler with Carrying Case
  • Upper Control Arm Bushing Service Set Remover Installer can easily replace press-in type upper control arm bushing on most rear wheel drive vehicles
  • Easily replace press-in type upper control arm bushing on most rear wheel drive vehicles
  • Mechanical screw power quickly removes the worn bushing
  • Install the new bushing without damaging the control arm
  • Package Includes - C frame, screw assembly & all adapters Needed for Replacing Pressing Type Upper Control Arm Bushing on most late models of Ford, GM & Chrysler Vehicles w/out Removing the Control Arm
Rank No. #7
Jewellers Tools 30+Pcs Brass Bushing Wire for Clocks 0.2 MM Upto 4.0 MM Clock Watch Tool Multicolor
  • Bushing wire for clocks
  • Minimum 30pcs mixed from 0.2 - 4.0mm
  • 6" or 150mm long
Rank No. #8
PMD Products Tool is Compatible with Repair and Replace of BMW E36 E46 Rear Axle Bushings
  • For use on BMW E36 E46 Chassis
  • Designed to remove the press fit the solid metallic rear suspension bushings (bushes/joints) located in the bearing carrier
  • Allows removal and installation of rear outer ball joint
  • This tool set allows for on-car installation/removal
  • andy tools eliminates the need to remove drive-line components from vehicle while servicing
SaleRank No. #9
ABN Rear Trailing Arm Bushing Tool – Trailing Arm Bushing Remover & Installer – Bushing Press Kit for Honda & Acura
  • REPLACE CAR BUSHES: Use the ABN Trailing Arm Bushing Removal Tool for replacement of the rear trailing arm bush (moveable metal suspension pieces on the rear of your car that the wheel, brake, and hub connect to) on your Honda or Acura vehicle
  • FITS YOUR VEHICLE: For Honda or Acura vehicles with trailing arm bushings; Applicable for Honda – Civic 1988-2000, CRV 1997-2001, CRX 1988-1991, Del Sol 1993-1997 and Acura – Integra 1994-2001, Integra 1990-1993
  • EASY STORAGE: Heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization
  • SIMPLE & SAFE DESIGN: Hook design for mounting the tool on the trailing arm securely without damaging the ABS sensor cable, trailing arm, and parts close to the bush with a hydraulic press or disconnect brake parts such as calipers, rotors, brake shoes, brake fluid lines, or emergency brake cables
  • EASY TO USE: Remove wheels and body lateral link bolts (watch for any camber shims between the body and the link), loosen (not remove) the toe link bolts, remove the trailing arm bush bolts, pull the trailing arm down enough to put on tool (you may need to disconnect brake line bracket/parking brake bracket on trailing arm), apply lubrication to trailing arm bush, use tool to push out the trailing arm bush, clean, lubricate, install new trailing arm bush, reassemble; 14mm socket not included
Rank No. #10
Build Your Own AK/AKM Tooling Kit: X-Ring Precision LLC Gunsmith Notebook Series (Volume 1)
  • Patrick, Lou (Author)
  • English (Publication Language)
  • 68 Pages - 03/03/2018 (Publication Date) - CreateSpace Independent Publishing Platform (Publisher)

Last update on 2021-05-02 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Bushing Tool?

Do you get stressed out thinking about shopping for a great Bushing Tool? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Bushing Tool, which is why we have assembled a comprehensive list of the greatest Bushing Tool available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Bushing Tool that you consider buying. Your questions might include the following:

  • Is it worth buying an Bushing Tool?
  • What benefits are there with buying an Bushing Tool?
  • What factors deserve consideration when shopping for an effective Bushing Tool?
  • Why is it crucial to invest in any Bushing Tool, much less the best one?
  • Which Bushing Tool are good in the current market?
  • Where can you find information like this about Bushing Tool?

We’re convinced that you likely have far more questions than just these regarding Bushing Tool, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Bushing Tool, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Bushing Tool. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Bushing Tool buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Bushing Tool currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Bushing Tool has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Bushing Tool?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Bushing Tool.
  5. Customer Ratings: Number ratings grade Bushing Tool objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Bushing Tool.
  7. Product Quality: You don’t always get what you pay for with an Bushing Tool, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Bushing Tool is should be an indication of how long it will work out for you.

We always remember that maintaining Bushing Tool information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Bushing Tool is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.