maxreading is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

The Best Bearing Puller Tool of 2022 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Bearing Puller Tool of 2022. Check our ranking below.

2,703 Reviews Scanned

Rank No. #1
Orion Motor Tech 23-Piece FWD Front Wheel Drive Bearing Adapters Puller Press Replacement Installer Removal Tool Kit
  • ALL-IN-ONE TOOL KIT: Everything you need for fast & effective front-wheel drive bearing removal and installation. Easily replaces wheel bearings while keeping the steering knuckle and strut assembled on the vehicle.
  • INCREASE EFFICIENCY: Designed to work with the steering knuckle and strut assembly still on the vehicle, eliminating the need for front end alignment after service while reducing damage to the hub and bearings.
  • ULTRA-DURABLE: Heavy-duty carbon steel construction with black anodic oxidation coating for ultimate rust-resistant performance.
  • UNIVERSAL COMPATIBILITY: Works with front-wheel drive hub bearing assembly parts on most front-wheel-drive American domestic and imported cars and small pickup trucks.
  • PORTABLE CARRY CASE: Packed in a custom carry case with precision-sized storage slots for each component, made of premium ABS to protect and extend the life of your tools.
Rank No. #2
Bearing Puller Set, 5-Ton-Capacity Bearing Separator, Wheel Hub Axle Puller Set, Pinion Bearing Removal Tool Kit, Bearing Splitter
  • EASY OPERATION: Includes everything you need for efficient replacement of small and large wheel bearings on front and rear wheel hubs, pinions, and axle drive shafts on most vehicles. Includes an extra 2-jaw puller (L-leg puller) for working with gears, pulleys, and fly-wheels.
  • UNIVERSAL COMPATIBILITY: Includes heavy-duty, drop-forged 2” & 3” bar-type bearing splitters and 4” & 5” long hex push-puller legs so you can safely remove large or small bearings on front and rear wheel hub axle shafts without the hassle.
  • HEAVY-DUTY DURABILITY: Built with rugged drop-forged construction and heat-treated to withstand rigorous jobs, this bearing puller set is proven dependable for the long haul.
  • PROTECTIVE CARRYING CASE: Includes a custom-made ABS tool case with precision-sized slots for each component. It keeps your gear organized while extending the life of your tools.
  • ALL-IN-ONE TOOL KIT: Includes 14-piece bar-type gear and axle bearing separator, 4-piece 4” (10cm), 4-piece 5” (12.7cm) hex push-puller legs, 1-piece 2” (5cm) and 1-piece 3” (7.6cm) bearing separator jaws or splitters, 2-piece L-type legs, 1-piece 5” (12.7) puller crossbar with 1-piece 6-1/4” (15.9cm) forcing screw.
Rank No. #3
Thin Two jaw Bearing Puller/Remover 30mm - 90mm by U.S.PRO Tools AT091
  • Special Design for narrow spaces
  • Working Depth: 93mm
  • Jaw Thickness: 1.5mm
  • Applicable bearing dimension: 30-90mm Diameter
  • Made from Chrome Vanadium Steel
Rank No. #4
12pcs 5 ton Capacity Bearing Separator Puller Set 2" and 3" Splitters Remove Bearings Kit
  • Practical: Use the Bearing Separator Set, 5-Ton Capacity – Bar-Type Bearing Splitter, Gear Puller, Fly Wheel Separator 12-Piece Kit when you need to separate bearings on your vehicle, ATV, snowmobile, and more
  • Versatile: For a wide variety of pulling jobs; Can remove bearings from a shaft, split bearings, and separate flywheels; Up to 5-Ton (4.5 MT) capacity; Can be used separately or with other pullers or tools
  • Durable: Each piece in this set is drop forged and heat treated for extra strength and longevity; Black oxide finish for corrosion resistance
  • Easy Storage: Heavy-duty 15” x 9.7” x 2” (38cm x 24.6cm x 5cm) blow-mold case with handle and latches for secure storage, easy transportation, and organization
  • Contents: 12-piece package includes 4-piece 4” (10cm) and 4-piece 5” (12.7cm) hex push-puller legs, 1-piece 2” (5cm) and 1-piece 3” (7.6cm) bearing separator jaws or splitters, 1-piece 5” (12.7) puller cross bar with 1-piece 6-1/4” (15.9cm) forcing screw
Rank No. #5
Two Jaw Pilot Bearing Gear Puller Remover Tool Carbon Steel Adjustable Pump Pulley Remover Hand Tool Removal Kit Straight Type(2.5 Inch(35×45mm))
  • 【High Quality Carbon Steel Material】-- These Two Jaw Pilot Bearing Gear Pullers are made of carbon steel, the point of the mandrill through a special heat treatment process, more solid and durable.
  • 【Adjustable for Different Gears and Bearings】-- The puller can be bilateral rotation, enable stretching size and working space.Two jaw with adjustable clamping depth, fit for different size gears and bearings.
  • 【Widely Applications】-- These Two Jaw Gear Pullers are ideal for automotive flywheel, motorcycle wheel, bicycle wheel, pump bearing generator bearing, machine bearing etc
  • 【Convenient to Use】-- Comes with hexagonal screw and thread for fastening, non-silp and high strength. Adjust screw design, flexible and convenient to repaired different size gears and bearing. It is easy to use.
  • 【Professional Jaw Bearing Gear Puller】-- Material: Carbon steel. Size: 2.5" / 3" / 4" / 6" / 8" for you to choose. If for any reason you are not completely satisfied with any of our products, just contact us directly so we can help with whatever is needed for you.
Rank No. #6
WINMAX TOOLS AUTOMOTIVE 16pc Blind Hole Pilot Bearing Puller Internal & Extractor Remove w/Slide Hammer
  • This is Goplus bearing puller set, which has high hardness and toughness. Collets are made from chrome molybdenum steel, and rust-proof finish of tool set for long-lasting using.
SaleRank No. #7
Orion Motor Tech Blind Hole Collet Bearing Race and Seal Puller Extractor Kit, Slide Hammer Pilot Insert Inner Internal Bearing Removal Tool Set, 16PCS
  • DURABILITY, this bearing puller set features high hardness and toughness for optimal performance. Collets made of chrome molybdenum steel ensure rust-proof performance and long-lasting using.
  • WIDE COMPATIBILITY, comes with various size and type of collets, Blind / Internal /Bearing Puller, this tool set boasts wide compatibility
  • EASY TO USE, this kit is easy to use, just insert the collect and expand it to fit the hole
  • PERFECT FOR PROFESSIONAL AND DIY USE, ideal for pulling jobs and will not damage parts in using, perfect for professional and DIY use.
  • PORTABILITY, comes with a durable storage case, you can neatly collect the tools and easily bring it to anywhere you like.
Rank No. #8
DURATECH 3-Inch 3-Jaw Gear Puller, Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CRV
  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more.
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphating, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH.
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 4 position reversible jaws offer inside or outside grip with short, standard reach.
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas.
  • Jaw Spread: 3in, Jaw Reach: 3-9/16in, Puller: 3T. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Achieve more with its adjustable and reversible jaws.
Rank No. #9
Orion Motor Tech 3" 4" 6" 8" 3-Jaw Gear Puller Set for Removal of Bearings Pulleys Flywheels
  • Universal Removal Tool: This 3-jaw removal tool set works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more, removing even rusted parts easily and—thanks to its even distribution of force—without damage.
  • Better Together: This professional or home tool kit includes four puller sizes to cover most applications: a 3 inch gear puller with a 2.3" reach and 3" max. spread; a 4 inch gear puller with a 3" reach and 4" max. spread; a 6 inch gear puller with a 4.7" reach and 6" max. spread; and an 8 inch gear puller with a 6.3" reach and 8" max. spread.
  • Versatile Design: Each of the three smaller 3-jaw gear and bearing pullers can be reversed to pull parts from the inside or outside; the 8 in. puller can be used in 4 different positions to deal with both medium and large parts.
  • 45# Carbon Steel: All parts are made with premium heat-treated 45# carbon steel for maximum strength. The jaws are galvanized and the central screw coated with black oxide to provide superior corrosion resistance and long service life.
  • Satisfaction Guaranteed: Along with this gear and bearing removal tool kit's durable material and careful engineering, you can rest easy knowing that these gear pullers are backed by OMT's warranty and friendly customer service.
Rank No. #10
Kinbelle 3 Inch Two Jaw Gear Pulley Bearing Puller Remover Tool Small Leg Mechanics for Auto Mechanic Hand Tools
  • Dimensions: 110*83*30mm / 4.33*3.27*1.18 Inches; Claw Length: About 75mm / 3".
  • Removal tool kit for slide gears, pulley, and flywheel makes removal simple and damage-free.
  • Made of carbon steel material for strength and longevity, it is durable.
  • Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress.
  • Can be used for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel, etc

Last update on 2021-06-11 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Bearing Puller Tool?

Do you get stressed out thinking about shopping for a great Bearing Puller Tool? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Bearing Puller Tool, which is why we have assembled a comprehensive list of the greatest Bearing Puller Tool available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Bearing Puller Tool that you consider buying. Your questions might include the following:

  • Is it worth buying an Bearing Puller Tool?
  • What benefits are there with buying an Bearing Puller Tool?
  • What factors deserve consideration when shopping for an effective Bearing Puller Tool?
  • Why is it crucial to invest in any Bearing Puller Tool, much less the best one?
  • Which Bearing Puller Tool are good in the current market?
  • Where can you find information like this about Bearing Puller Tool?

We’re convinced that you likely have far more questions than just these regarding Bearing Puller Tool, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Bearing Puller Tool, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Bearing Puller Tool. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Bearing Puller Tool buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Bearing Puller Tool currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Bearing Puller Tool has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Bearing Puller Tool?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Bearing Puller Tool.
  5. Customer Ratings: Number ratings grade Bearing Puller Tool objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Bearing Puller Tool.
  7. Product Quality: You don’t always get what you pay for with an Bearing Puller Tool, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Bearing Puller Tool is should be an indication of how long it will work out for you.

We always remember that maintaining Bearing Puller Tool information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Bearing Puller Tool is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.