maxreading is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

The Best 1 Ohm Stable Amp of 2020 – Reviewed and Top Rated

2,025 Reviews Scanned

Rank No. #1
Hifonics Zeus 1X1800WATTS@1OHM Mono (ZG-1800.1D)
  • Package Weight: 5.89 kg
  • Product type :SPEAKERS
  • Package Dimensions: 10.2 L x 36.6 H x 27.6 W (cm)
  • country of origin : Chile
Rank No. #2
Planet Audio MB1200.1D Class D Car Amplifier - 1200 Watts, 1 Ohm Stable, Digital, Monoblock, Mosfet Power Supply, Great for Subwoofers
  • Power - 1200 Watts Max x 1 @1-Ohm, 600 Watts Max x 1 @2-Ohms, 300 Watts Max x 1 @4-Ohms
  • Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
  • 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
  • Variable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
  • Variable Subsonic Filter - To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion
SaleRank No. #3
Taramp's HD 3000 1 Ohm Class D Full Range Mono Amplifier
  • Excellent for voice as well as bass
  • 1 ohm
  • 3000 watts
  • Mono
  • Bass boost
Rank No. #4
Hifonics BXX1200.1D Brutus Class D 1200W RMS 1 Ohm Mono Car Subwoofer Amplifier
  • The BXX1200.1D is a 1200 watt mono amplifier featuring Super Class D technology with an NGSD digital chip to provide you with an extremely efficient, low temperature, high amplification system that others only dream about.
  • The rock solid Ultra-Fi MOSFET outputs are selected for both balance and output power. This keeps power smooth even during demanding peak in the music.
  • The amplifiers protection condition is also shown by blue illumination for normal operation and red for a short being present and requires the attention of an installer.
  • Max Power Rating: 4 ohms: 400 watts x 1 chan. 2 ohms: 600 watts x 1 chan. 1 ohm: 1200 watts x 1 chan.
  • Dimensions: 9"W x 13.25"L x 2.5"H, 1-year Manufacturer's Warranty
Rank No. #5
Planet Audio TR5000.1D Class D Car Amplifier - 5000 Watts, 1 Ohm Stable, Digital, Monoblock, Mosfet Power Supply, Great for Subwoofers
  • POWER: 5000 Watts Max x 1 @1-Ohm, 2500 Watts Max x 1 @2-Ohms
  • CLASS D: Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
  • MOSFET POWER SUPPLY: A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
  • 1 OHM STABLE: Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
  • STRAPPING CAPABLE: You are able to strap TWO TR5000.1D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power
Rank No. #6
BOSS Audio Systems R3400D Class D Car Amplifier - 3400 High Output, 1 Ohm Stable, Digital, Monoblock, Mosfet Power Supply, Great for Subwoofers
  • Power - 3400 Watts Max x 1 @1-Ohm, 1700 Watts Max x 1 @2-Ohms, 850 Watts Max x 1 @4-Ohms
  • Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
  • 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
  • Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
  • Strapping Capable - You are able to strap two R3400D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power
SaleRank No. #7
Precision Power Class D Mono Amplifier 5000W - 5000 Watts Monoblock Class D Subwoofer Amplifier
  • 5000W MAXIMUM OUTPUT FOR POWERFUL AUDIO.
  • 1100 Watts x 1 RMS @ 4 Ohms Mono. / 1700 Watts x 1 RMS @ 2 Ohms Mono. / 2500 Watts x 1 RMS @ 1 Ohm Mono.
  • CROSSOVERS & BASS BOOST: Variable Crossovers and Bass Boosting Ensures Flexible Operation.
  • 105dB SENSITIVITY: Picks Up The Highs and Lows For Faithful Sound Reproduction.
  • REMOTE BASS CONTROL: Mount It Under The Dash or Anywhere Within Reach For Fast Bass Adjustments.
Rank No. #8
Kicker 46CXA1200.1 1200-Watt Class D Monoblock Subwoofer Amplifier
  • KICKER 46CXA12001T CXA1200.1 1200 Watt RMS Mono Class D Car Stereo Amplifier Amp. Efficient Class-D amplifier. Three-second turn-on/off delay to eliminate unwanted interference. Variable 12dB crossovers provides control to dial in perfect sound. KickEQ 6dB variable bass boost for those additional low frequencies.
  • 24dB subsonic filter for protection from potentially damaging frequencies. FIT+ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio. Accepts up to 40-volt input signal. Small footprint for easier installation.
  • Compatible with CXARC Remote Bass Control. Vertical mounting hardware included for another unique look. Dimension (L x W x H): 15.75 inch x 9 inch x 4 inch. Weight: 7.75 lbs.
  • Specifications: Power Rating: 4 ohms: 600 watts x 1 chan., 2 ohms: 1200 watts x 1 chan., 1 ohms: 1200x1 +/-10% chan.
  • CXRC Remote Bass Capable (sold sep.). Dimensions: 12 in. (30,6 mm). Frequency Response: 25 - 200Hz. Input sensitivity: Low level: 250mV-10V ; High level: 1V-40V. Signal to Noise Ration: 95dB. Active Crossover: Variable Lo-pass 50Hz–200Hz, 12dB/octave. Subsonic Filter @ 25hz, 24db/octave. KickEQ Boost: Variable 0-6dB @40Hz.
SaleRank No. #9
Planet Audio PL4000.1D Class D Car Amplifier - 4000 Watts, 1 Ohm Stable, Digital, Monoblock, Mosfet Power Supply, Great for Subwoofers
  • Power - 4000 Watts Max x 1 @1-Ohm, 2000 Watts Max x 1 @2-Ohms, 1000 Watts Max x 1 @4-Ohms, 8000 Watts Max x 1 @2-Ohms strapped
  • MOSFET Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
  • Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
  • 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
  • Strapping Capable - You are able to strap two PL4000.1D amplifiers and double the power that is being sent to your subwoofers. You now have the ability to connect more subwoofers to take advantage of the extra power
SaleRank No. #10
Sound Storm EV4000D Evolution 4000 Watt, 1 Ohm Stable Class D Monoblock Car Amplifier with Remote Subwoofer Control
  • 4000 W MAX Power @ 1 Ohm x 1 Channel
  • 2000 W MAX Power @ 2 Ohm x 1 Channel
  • 1000 W MAX Power @ 4 Ohm x 1 Channel
  • Low Level Inputs, RCA Pre-amp Outputs, Strapping Capability, Phase Shift Selector, Variable Subsonic Filter
  • Variable Low Pass Crossover, Bass Boost, Variable Input Gain Control, Input Sensitivity Selector

Last update on 2021-04-24 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best 1 Ohm Stable Amp?

Do you get stressed out thinking about shopping for a great 1 Ohm Stable Amp? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching 1 Ohm Stable Amp, which is why we have assembled a comprehensive list of the greatest 1 Ohm Stable Amp available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for 1 Ohm Stable Amp that you consider buying. Your questions might include the following:

  • Is it worth buying an 1 Ohm Stable Amp?
  • What benefits are there with buying an 1 Ohm Stable Amp?
  • What factors deserve consideration when shopping for an effective 1 Ohm Stable Amp?
  • Why is it crucial to invest in any 1 Ohm Stable Amp, much less the best one?
  • Which 1 Ohm Stable Amp are good in the current market?
  • Where can you find information like this about 1 Ohm Stable Amp?

We’re convinced that you likely have far more questions than just these regarding 1 Ohm Stable Amp, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for 1 Ohm Stable Amp, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible 1 Ohm Stable Amp. Make sure that you are only using trustworthy and credible websites and sources.

We provide an 1 Ohm Stable Amp buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available 1 Ohm Stable Amp currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of 1 Ohm Stable Amp has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an 1 Ohm Stable Amp?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your 1 Ohm Stable Amp.
  5. Customer Ratings: Number ratings grade 1 Ohm Stable Amp objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their 1 Ohm Stable Amp.
  7. Product Quality: You don’t always get what you pay for with an 1 Ohm Stable Amp, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an 1 Ohm Stable Amp is should be an indication of how long it will work out for you.

We always remember that maintaining 1 Ohm Stable Amp information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding 1 Ohm Stable Amp is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.